Quantcast
Channel: SCN : All Content - All Communities
Viewing all 8613 articles
Browse latest View live

Generation of BP for Future hires

$
0
0

Hi All,

 

I am facing an issue with the generation of BP for Employees who are hired on a future date.The issues are:

 

1) BP is not getting generated automatically for any future date, it gets created only when the hiring date = System date. Firstly is this ok?

2) When I am trying to create BP for a CP via HRALXSYNC report it does not select that CP id. i.e. when I am giving the CP id in input field & executing this report, it showz blank result after executing & then if I check 1001, the BP is is still not generated.I am sure this is an issue, request you to please help/guide me for getting this resolved

BP is not getting created even if i try executing this report using the standard variant provided by SAP i.e.SAP&DEFAULT - VARIANT FOR BATCH INPUT

 

Please help me in resolving same.

 

Please note: The switches are already activated & BP is getting generated for Hire Date = System date

 

Regards

Bharti


KP06 upload for many line items

$
0
0

Hi all,

 

we are doing cost centre planning in BPC and want to pull the data back into our SAP system into KP06.  However, the standard SAP way of doing this is very buggy and troublesome to implement. 

 

There are too many line items for an Excel based upload to handle and it is too slow to use an LSMW.  We would like to build a custom transaction to load data into the tables relating to transaction KP06, are there any BAPI's which we can use to do this?

 

Many thanks

Phil

MSS on behalf of/related activities from employee profile

$
0
0

Hi all,

 

I have run into an interesting problem. This is the scenario:

we are running ESS/MSS ECC EhP5 wih MSS Add-on 1.0 and I am trying to set up the related activities for a manager, when viewing the employee's profile. This is fine and the LPD menu is set up. However, when the related activity application (e.g. HRESS_A_PERSINFO) is launched, it is the manager's PERNR being used. Now I've tried everything relating to parameters, application aliases in the LPD, etc., but nothing will force the PERNR of the employee to be used. I've also looked at all the BAdIs relating to this and in fact, none of them are called in this instance. And this appears to be the problem.

 

As a point to consider, if I configure related activities for the Nakisa Org chart component, this works perfectly - the PERNR is passed to memory in HRMSS_MOD_BUS_PARAMS_P_MEM_ID and I can undertake activities on behalf of the employee. However, from the employee profile pop-up, the PERNR is not passed and I cannot work with the employee's data. Some screen shots to help illustrate. Has anyone else noticed this - I'm considering this as a bug as it is clear the BAdI that is supposed to be called is not being called.

 

When running from the employee profile...

emp profile select.png

Select the related activity... we are using the correct employee (User 2 ESS)...

emp profile related.png

but when I select the Related Activity (Personal Profile...) I get the manager...

emp profile manager.png

 

For comparison's sake, if I do the same from the Org Chart Visualisation (Nakisa), everything works as expected... I configure the same LPD roel and instance menu against the Org Chart Navigation Field Group.

org chart lpd.png

Open the Org Chart and select the Related Activity...

org chart exec.png

And I get the Personal Profile for the employee (User 3 ESS) as expected.

org chart on behalf of.png

 

Furthermore, when run from the Org Chart, BAdI HRMSS_MOD_BUS_PARAMS_P_MEM_ID executes. When done from the Employee Profile, none of the BAdIs listed here execute.

BADIs.png

Using Parameter in query manager report

$
0
0

Dear Experts!

     i would like to ask whether i can write a report in query manager and using the parameter in the query below:

Untitled.png

Thanks in advance.

Adding fields to Ibase in GUI

$
0
0

Hi All,

 

I would like to know how can we add new fields to Ibase in GUI .?

 

Can I use the approach of Settypes and attriutes, if yes then can anyone please elaborate.

 

Regards

Shilpi

how we convert the timestamp from an attribute in Universe to local timezone in BI

$
0
0

Hi,

Can anyone please share how we convert the timestamp from an attribute in Universe to local timezone in BI?

Example : I have one date column show 01-Oct-2014 19:00:00 (CDT) and i wish to display as 02-Oct-2014 08:00:00 (GMT + 8).

SAP ESS/MSS Business Package configuration

$
0
0

Hi All,

 

I have installed SAP Netweaver 742 java stack and deployed ESS/MSS business packages for portal using SUM tool.

 

Can someone guide me in configuring ESS/MSS after deploying .SCA files or share a configuration documentation.

 

Regards,

Raj

Se80 transaction layout "This program cannot display the webpage"

$
0
0

Hello, masters of sap.

 

I have a minisap and i´m learning WDA, but the se80 transaction in layout show me "This program cannot display the webpage". How can to fix this problem.

 

The minisap version is netweaver abap 7.31

 

Enclose picture

 

 

Thanks for your answers.

 


Movement Type 545

$
0
0

Hi Gurus

 

We have a case in subcontracting where in we make a purchase order of subcontracting and in components we maintain scrap as a negative stock which in actual we want to receive along with the material from the vendor.

 

However when we do migo system updates the scrap with 545 and post the same to vendor

 

i have read earlier post regarding this in forum but my question is still unanswered

 

1. How to bring back the stock of scrap back from vendor to original stock so that same can be sale in our system

2. We want to have stock of scrap posted when we do migo of subcontracting purchase order along with the product.

 

 

Thanks in advance

 

Regards

Chetandeep Singh

SET_ATTRIBUTE_PROPERTY doesnt work

$
0
0

Hi All,

 

I have a declared a node ABC cardinality 1:1 under the context of my view and under this node ABC i have an Attribute MARK type boolian.

in the layout, I have a UI element check box for which I have binded the attribute MARK.

 

Now I want to set the read_only property dynamically to this check box.

 

LO_ND_ABC = WD_CONTEXT->GET_CHILD_NODE( NAME =  WD_THIS->WDCTX_ABC ).

LO_EL_ABC = LO_ND_TRAVEL_DATA->GET_ELEMENT( ).

 

CALL METHOD LO_EL_ABC->SET_ATTRIBUTE_PROPERTY
     EXPORTING
       ATTRIBUTE_NAME = 'MARK'
       PROPERTY       = 3
       VALUE          =  'X'.


But the check box was not set with read_only property.

I have searched many threads and after which i am raising this problem here.


I have also tried SET_ATTRIBUTE_PROPS_FOR_ELEM and SET_ATTRIBUTE_PROPS_FOR_NODE aswel.. but nothing worked out..

Please help.


I don't want to create an attribute and bind it to read_only property of the check box in the layout.

Mismatch in "In Stock" Quantity(Item master) and "Balance Quantity" in Inventory posting list

$
0
0

Hi All,

Can anyone please provide me the  possible reasons/factors for mismatch in "In Stock" Quantity (under Item master ->Inventory tab) and "Balance Quantity"  in Inventory posting list report for a specific Item and warehouse.

 

For example i have attached a sample data in screen shot.

The parameter selected in Inventory posting list is a single warehouse'01' and in Expand Selection Criteria ->Selected all transaction Journals.

 

Regards,

Bharath

SSF configuration for external Smartcard Readers

$
0
0

Hello colleagues,

I 'm working at a customer who is implementing a SAP project (R/3 4.6C SR2), in which is involved the goverment.

The goverment is forcing to the customer to implement digital signature in some steps of his business process, one of this steps is running on SAP R/3 system. The digital signature will be used with digital signature in order to "package" some critical data like "billing amount", for instance.

The goverment is imposing the smartcard encryption solution, that is hardware encryption.

I have been looking for information about it, so I understood the following:

 

1._ Some smartcards vendors are compliance with SAP.

2._ I need to install in the server running SAP the smartcard and the smartreader in order to manipulate and to access the encryption functionality.

3._  The smartcard is configured in SAP by transaction SSFA and other reports.

4._  The encryption functionality is accessed by SSF function group.

 

I downloaded the documents "SSF user guide", "security quick guide: digital signature" and "digital signature in FI".

 

I've found into a paper called "Digital Signatures

in SAP Applications - Web App.Server 6.40" the following:

 

-


1.3.1. SSF for the ABAP Stack

The SSF Library for the ABAP Stack is used in applications that are written in ABAP. It supports the functions for creating and verifying digital signatures (PKCS#7), and functions for encrypting and decrypting documents.

SSF requires an external security product to provide these functions. The SAP Security Library (SAPSECULIB) is delivered with the SAP system as the default product. However, the SAP Security Library only supports digital signatures without cryptographic hardware (SmartCards, SmartTokens, Cryptoboards). Instead of the SAPSECULIB, customers can also use the SAPCRYPTOLIB, which can be downloaded from the SAP Service Marketplace. The SAPSECULIB supports the DSA (Digital Signature Algorithm) algorithm, and the SAPCRYPTOLIB supports both the DSA and the RSA algorithms. The algorithm that you must use in your signature process depends on the CA that issues the certificate. Most CAs use the RSA algorithm. Note that country-specific export guidelines apply in the case of the SAPCRYPTOLIB. For more information, see SAP Note 397175.

For support for encrypting and decrypting documents, and for generating digital signatures using cryptographic hardware, an external security products from our partners is required. These security products use SAP’s SSF interface and are certified for this by SAP. For a list of the certified products, see the SAP Service Marketplace under http://service.sap.com/securitypartners, and then choose the link “Partner for Secure Store and Forward, digital signatures“ (SSF).

The SSF Library for the ABAP stack is available as of SAP Basis 4.0.

-


 

I don't undertand how is the relationship between SAPCRYPTOLIB and the SmartReader Card established/configured.

 

We think about the "Government of Chile" will deliver the customer a SmartCard Reader from Schlumberger (Cryptoflex 16K Card).

 

Should be great if you can provide me with any useful information in order to understand how to implement this configuration.

 

Best regards, Carlos

 

 

Message was edited by: Carlos Guevara

 

 

Message was edited by: Carlos Guevara

 

 

Message was edited by: Carlos Guevara

 

strange entry in VKm4

$
0
0

we use fscm credit management instead of classic credit mnanagement, in VA03, SD header, status: credit status: approved, overall blocked status: not blocked, system status: rel, item level status: overall status: open

 

 

but it appear in VKM4, why

SAProuter validity issue

$
0
0

Hi !

 

I've renewed my SAProuter SNC certificate successfully a few days back...

The validity date on Service Marketplace shows correctly as one year.

 

However, sapgenpse shows validity till July 18 2015 only !

 

I'm not sure how this discrepancy crept in since all the steps went thru' smoothly...

 

Should I request another certificate...

 

Please help advise...

 

Thanks a lot !

saba.

problem enhancement infotype 21

$
0
0

Dear Expert

 

i get request to enhance infotype 21,

 

on pm01, iam chose @ single scrn, and klik button  generate object,

after that new columns has display on pa0021 but not display on pa30 infotype 21

and then i chose IT on pm01, and klik button generate object. put access key and then, iam goto pa30, and create data on infotype 21 and get error :

syntax error in program  MPV31800

 

the following syntax error occurred in program MPV31800 in in clude  mpv31810 in line 10 psave has already been declared

 

can some one help me how to solve this problem or rollback my enhancement

 

thnks very much for help

jo


Proration of Infotye 0014

$
0
0

Hi,

 

I would like to know how to prorate infotype 0014 according to dates

 

Please help me on how to write the PCR.

 

Thanks and Regards,

Zulfikarlos

Error-Product does not exist in /n/scwm/adhu

$
0
0

    
When i am performing /n/scwm/adhu i am getting the error "Product does not exist--Message no. /SCWM/MD002"

 

 

Please advice.

 

 

Thanks

Optimization Issue

$
0
0

Hello, I have an internal table which has a only four fields in it.

 

Material

GL_Account

Amount

Customer.

 

I want to update a standard database table with data that is in my internal table, the problem  is that standard database table's structure is different than my internal table. so i created another internal table which is TYPE my database table and work area. ok

then I did a loop from Internal table into Workarea.

 

INT_TAB has four fields above.

WA_INT is INT_TAB's work area

 

STD TABLE is a standard database table

WA_STD_TAB is work area of STD_TAB which is TYPE STANDARD TABLE OF standard database table.

 

This is my code:

 

Loop at Int_Tab into WA_INT.

 

WA_std_tab-ZZMATERIAL = WA_INT-ZZMATERIAL.

WA_std_tab-ZZGL_ACCOUNT = WA_INT-ZZGL_ACCOUNT.

WA_std_tab-ZZAMOUNT = WA_INT-ZZAMOUNT.

WA_std_tab-ZZCUSTOMER = WA_INT-ZZCUSTOMER.

 

UPDATE STD_TAB from WA_STD_TAB.

ENDLOOP.

 

My code compiled okay but this is very very slow and times out after 40 mins. I am only pulling 1 million records. I am looking and see how to optimize this better.  This should be done in a few minutes.

 

Please suggest me what to do here,

Thanks.

Getting and transforming data in code to data paradigm

$
0
0

Hi all,

 

I'm currently trying to develop a powerlist by joining three tables together, QCPR, EKBE and EKPO. However i need to transform a colum based on another column.

So when EKBE.SHKGZ = H then the value EKBE.MENGE needs to be negative.

 

I have got this to work using an analytic view and a formula. However i would like to do it in the code to data paradigm either by using a CDS view or an AMDP procedure.

 

I have tried both, but haven't gotten it to work yet. In the CDS view i can transform my data fine, however i am currently using the union all statement and therefore not getting the aggregated resultset which i want.

 

Then i tried to use a AMDP procedure, but here i can't activate it because my return type doesn't match, and i haven't been able to get any further.

 

I am hoping someone can help me out on how to do this. Thanks in advance.

 

Here is my method in the AMDP example

 

METHOD get_data BY DATABASE PROCEDURE FOR HDB

                           LANGUAGE SQLSCRIPT using QCPR EKBE EKPO.

 

 

  output = select qc.CERTNO, qc.ZGTYP, qc.EBELN, qc.EBELP, qc.MATNR, qc.WERKS, qc.CHARG, qc.LICHN, qc.LFSNR,

  qc.LIFNR, qc.HERSTELLER, qc.MJAHR, qc.MBLNR, qc.ZEILE, qc.BUDAT, qc.STATUS, qc.REMDAT, qc.ESCDAT, 

  qc.CERTDAT, qc.CERTREC, qc.ERSTELLER, qc.ERSTELDAT, qc.ERSTELZEIT, qc.AENDERER, qc.AENDERDAT, qc.AENDERZEIT, be.menge * -1 as menge, po.meins from QCPR as qc

  inner join ekbe as be on qc.ebeln = be.ebeln

  and qc.ebelp = be.ebelp

  and qc.mjahr = be.lfgja

  and qc.mblnr = be.lfbnr

  and qc.zeile = be.lfpos

  inner join ekpo as po on qc.ebeln = po.ebeln and qc.ebelp = po.ebelp

  where be.shkzg = 'H';              

 

  output1 = select qc.CERTNO, qc.ZGTYP, qc.EBELN, qc.EBELP, qc.MATNR, qc.WERKS, qc.CHARG, qc.LICHN, qc.LFSNR,

  qc.LIFNR, qc.HERSTELLER, qc.MJAHR, qc.MBLNR, qc.ZEILE, qc.BUDAT, qc.STATUS, qc.REMDAT, qc.ESCDAT, 

  qc.CERTDAT, qc.CERTREC, qc.ERSTELLER, qc.ERSTELDAT, qc.ERSTELZEIT, qc.AENDERER, qc.AENDERDAT, qc.AENDERZEIT, be.menge, po.meins from QCPR as qc

  inner join ekbe as be on qc.ebeln = be.ebeln

  and qc.ebelp = be.ebelp

  and qc.mjahr = be.lfgja

  and qc.mblnr = be.lfbnr

  and qc.zeile = be.lfpos

  inner join ekpo as po on qc.ebeln = po.ebeln and qc.ebelp = po.ebelp

    where be.shkzg != 'H';

 

 

  put3 = ce_join(:output, :output1, [CERTNO], [CERTNO, ZGTYP, EBELN, EBELP, MATNR, WERKS, CHARG, LICHN, LFSNR,

  LIFNR, HERSTELLER, MJAHR, MBLNR, ZEILE, BUDAT, STATUS, REMDAT, ESCDAT, 

  CERTDAT, CERTREC, ERSTELLER, ERSTELDAT, ERSTELZEIT, AENDERER, AENDERDAT, AENDERZEIT, menge]);

  et_output = select * from :output3;

 

And this is my CDS view

@AbapCatalog.sqlViewName: 'ZFSC_CERT'

define view ZFSC_CERTIFICATION_view as

select from QCPR as qc

  inner join ekbe as be on qc.ebeln = be.ebeln

  and qc.ebelp = be.ebelp

  and qc.mjahr = be.lfgja

  and qc.mblnr = be.lfbnr

  and qc.zeile = be.lfpos

  inner join ekpo as po on qc.ebeln = po.ebeln and qc.ebelp = po.ebelp

{

    key qc.CERTNO as CERTNO,

key qc.ZGTYP as ZGTYP,

key qc.EBELN as EBELN,

key qc.EBELP as EBELP,

qc.MATNR as MATNR,

qc.WERKS as WERKS,

qc.CHARG as CHARG,

qc.LICHN as LICHN,

qc.LFSNR as LFSNR,

qc.LIFNR as LIFNR,

qc.HERSTELLER as HERSTELLER,

qc.MJAHR as MJAHR,

qc.MBLNR as MBLNR,

qc.ZEILE as ZEILE,

qc.BUDAT as BUDAT,

qc.STATUS as STATUS,

qc.REMDAT as REMDAT,

qc.ESCDAT as ESCDAT,

qc.CERTDAT as CERTDAT,

qc.CERTREC as CERTREC,

qc.ERSTELLER as ERSTELLER,

qc.ERSTELDAT as ERSTELDAT,

qc.ERSTELZEIT as ERSTELZEIT,

qc.AENDERER as AENDERER,

qc.AENDERDAT as AENDERDAT,

qc.AENDERZEIT as AENDERZEIT,

be.menge * -1 as menge

}

  where shkzg = 'H'

  group by qc.CERTNO, qc.ZGTYP, qc.EBELN, qc.EBELP, qc.MATNR, qc.WERKS, qc.CHARG, qc.LICHN, qc.LFSNR,

  qc.LIFNR, qc.HERSTELLER, qc.MJAHR, qc.MBLNR, qc.ZEILE, qc.BUDAT, qc.STATUS, qc.REMDAT, qc.ESCDAT, 

  qc.CERTDAT, qc.CERTREC, qc.ERSTELLER, qc.ERSTELDAT, qc.ERSTELZEIT, qc.AENDERER, qc.AENDERDAT, qc.AENDERZEIT, po.meins, be.menge

 

union all

 

select from QCPR as qc

  inner join ekbe as be on qc.ebeln = be.ebeln

  and qc.ebelp = be.ebelp

  and qc.mjahr = be.lfgja

  and qc.mblnr = be.lfbnr

  and qc.zeile = be.lfpos

  inner join ekpo as po on qc.ebeln = po.ebeln and qc.ebelp = po.ebelp

{

    key qc.CERTNO as CERTNO,

key qc.ZGTYP as ZGTYP,

key qc.EBELN as EBELN,

key qc.EBELP as EBELP,

qc.MATNR as MATNR,

qc.WERKS as WERKS,

qc.CHARG as CHARG,

qc.LICHN as LICHN,

qc.LFSNR as LFSNR,

qc.LIFNR as LIFNR,

qc.HERSTELLER as HERSTELLER,

qc.MJAHR as MJAHR,

qc.MBLNR as MBLNR,

qc.ZEILE as ZEILE,

qc.BUDAT as BUDAT,

qc.STATUS as STATUS,

qc.REMDAT as REMDAT,

qc.ESCDAT as ESCDAT,

qc.CERTDAT as CERTDAT,

qc.CERTREC as CERTREC,

qc.ERSTELLER as ERSTELLER,

qc.ERSTELDAT as ERSTELDAT,

qc.ERSTELZEIT as ERSTELZEIT,

qc.AENDERER as AENDERER,

qc.AENDERDAT as AENDERDAT,

qc.AENDERZEIT as AENDERZEIT,

sum(be.menge) as menge

}

  where shkzg != 'H'

  group by qc.CERTNO, qc.ZGTYP, qc.EBELN, qc.EBELP, qc.MATNR, qc.WERKS, qc.CHARG, qc.LICHN, qc.LFSNR,

  qc.LIFNR, qc.HERSTELLER, qc.MJAHR, qc.MBLNR, qc.ZEILE, qc.BUDAT, qc.STATUS, qc.REMDAT, qc.ESCDAT, 

  qc.CERTDAT, qc.CERTREC, qc.ERSTELLER, qc.ERSTELDAT, qc.ERSTELZEIT, qc.AENDERER, qc.AENDERDAT, qc.AENDERZEIT, po.meins;

Error Backup : Shutdown of database instance SID failed

$
0
0

Dear master,

 

I have the problem with backup SAP on aix.

error below:

 

BR0280I BRBACKUP time stamp: 2014-10-04 07.43.18

BR0307I Shutting down database instance BMQ ...

BR0278E Command output of '/oracle/BMQ/102_64/bin/sqlplus /nolog < /oracle/BMQ/sapbackup/.beowsqnn.spi':

6553968 : map : Permission Denied

6553968 : map : Permission Denied

6553968 : map : Permission Denied

SQL*Plus: Release 10.2.0.4.0 - Production on Sat Oct 4 07:43:18 2014

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.

SQL> Connected.

SQL> csh: The file access permissions do not allow the specified action.

SQL> ORA-01013: user requested cancel of current operation

SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production

With the Partitioning, Data Mining and Real Application Testing options

BR0280I BRBACKUP time stamp: 2014-10-04 08.43.17

BR0279E Return code from '/oracle/BMQ/102_64/bin/sqlplus /nolog < /oracle/BMQ/sapbackup/.beowsqnn.spi': 0

BR0302E SQLPLUS call for database instance BMQ failed

BR0309E Shutdown of database instance BMQ failed

BR0056I End of database backup: beowsqnn.aft 2014-10-04 08.43.17

BR0280I BRBACKUP time stamp: 2014-10-04 08.43.17

BR0054I BRBACKUP terminated with errors

 

Existing permission folder sapbackup 755

and I change into 777

but same the error.

 

please your advice master..

Viewing all 8613 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>